Transystem iGPS-M Pro USB GPS Driver (for Windows XP and VIsta)

This is a Microsoft Windows compatible driver for the Transystem iGPS-M Pro USB GPS that Maptech offers as an accessory for its Navigation software products. It is the same driver that is included on the CD that accompanied the GPS and is required to use the GPS on any computer.

To Install the Driver

  1. Following the instructions, below, download the iGPS-M GPS driver. However, do NOT connect the GPS.
  2. Double-Click on the iGPS-M_Pro_Driver application.
  3. Follow the on-screen instructions to install the driver. Restart the computer, if prompted to do so.
  4. Once complete, plug the iGPS-M GPS into your computer. The computer should recognize the device.
  5. Configure the Maptech Navigation software to use the GPS. Please note that this GPS operates at 9600 baud - which differs from the standard 4800 baud used by most NMEA GPSs.

Using the GPS
- When using the GPS, it must be in clear view of the sky.
- The indicator light on the GPS will be on steady when it is receiving power.
- When the indicator light flashes periodically, the GPS has acquired a satellite signal and is operating properly.

  1. To Verify the COM Port used by the GPS
    Click Start, Control Panel, Performance & Maintenance, System, Hardware, Device Manager.
  2. In the list, find "Ports (COM & LPT)" and check the Virtual COM Port, which was created by the USB driver. For example: CP210x USB to UART Bridge Controller [COM #].
  3. Use this COM Port when connecting to the GPS. Or, use the GPS Setup Wizard that is included with Maptech's suite of Navigation products to connect the GPS to the software.

Please note that the Virtual COM Port number might be different on every computer or may change each time new devices are installed.


File Name 

File Size 



  325.50 KB
CP210X Windows Driver V4.40
Requires Transystem iGPS-M Pro USB GPS receiver. DO NOT USE WITH OTHER GPS DEVICES!
Manual_iGPS-M_Pro.pdf 371.99 KB for iGPS-M Pro USB GPS Requires Adobe Acrobat Reader.

 Back to Downloads

Contacting Technical Support

First browse our website to get the answers you need. If you cannot find them, we suggest sending an email to

Support is available to registered users of versions 8.3 and newer from 10 AM to 4 PM EST/EDT, Monday through Friday.

CAPN Software LLC
Fax: 703.759.3266


Product Registration

To register your product follow the link below and complete the product registration form, you will receive an email with The CAPN registration code confirming your registration.

Product Registration Form

CAPN Software LLC // Fax: 703.759.3266